IVG SMART MAX device only - Black
Here is the black IVG SMART MAX body with nothing else attached: £4.99, reduced from £7.99, for the rechargeable half of the SMART MAX pod system. Inside the housing are a 1000mAh battery, a small screen, a pair of power modes called Boost and Eco, and a sensor that fires the coil when you inhale. It charges over Type-C. What arrives in the packaging is the device and its user manual. No refill pod, no e-liquid and no charging lead are part of this listing, so a SMART MAX pod and a suitable cable are both things you bring yourself.
Most people who order a device on its own are not starting out with the SMART MAX. They are replacing something. A body gets left on a train, dropped on a pavement, or simply starts to hold its charge for less time than it used to, while a drawer still holds several perfectly good pods. For that owner, buying a full kit means paying for a pod they do not need. The device-only listing solves exactly that problem, and nothing more.
So this page is written for someone who will own the thing, day in and day out. It walks through what is and is not in the packaging, how to charge it and read its screen, how the two modes affect the time between charges, how to look after it and carry it, what the signs of a tired device look like, and, importantly, when a SMART MAX kit is actually the cheaper way to replace a body. If what you want is advice on which flavours to fit, the refill pod listings and the range page cover that; the focus here is the hardware.
Unpacking: what you have, and what you still need
The listing names two items in the packaging.
- One IVG SMART MAX device, black. The rechargeable body with its screen, battery and draw sensor.
- One user manual. Worth keeping. It is the only document that explains how the modes are selected, since the listing confirms the modes exist but not how you move between them.
Just as useful is the list of things you will not find:
- A pod. The device has no liquid and no coil of its own. Until a SMART MAX refill pod is fitted, it will not produce vapour.
- A charging cable. IVG state plainly that the cable is not included. The port is Type-C, so any lead with a Type-C plug on the device end is the kind you need.
- A plug or power adapter. Not listed, so assume you will charge from a laptop, a wall adapter you already own, or a similar source.
- A case, lanyard or accessory. None are mentioned on the listing.
Before the parcel arrives, then, it is worth checking two things at home: that you have at least one SMART MAX pod ready, and that there is a Type-C cable within reach. If either is missing, the device will sit in its packaging until they are sorted.
The specification, row by row
| Item | Detail from the listing |
|---|---|
| Product | IVG SMART MAX device only, Black |
| SKU | FG-000152-776-NA-NA |
| Current price | £4.99 |
| Previous price | £7.99 |
| Power source | Built-in 1000mAh rechargeable battery |
| Charging connector | Type-C (no cable in the packaging) |
| Display | Shows battery level, charging status and selected mode |
| Output settings | Boost or Eco |
| Activation | Inhale to fire; there are no buttons |
| Pods it takes | IVG SMART MAX refill pods, built around a 0.8 ohm mesh coil |
| Packaging contents | Device and user manual |
| Liquid supplied | None |
In ownership terms, the battery row and the connector row are the ones that shape your routine. A 1000mAh cell is a figure for stored capacity; the listing does not translate it into hours or days, and in reality that depends on the mode, the pod and how often you vape. The connector row tells you which cable to keep handy. The display row explains how you will know when to use that cable, since the screen reports both the level and whether charging is under way.
The pod row is a reminder that this body is one half of a pair. The 0.8 ohm mesh coil is part of each SMART MAX pod rather than part of the device, which means the body itself has no coil to wear out or replace. Every coil-related issue you meet as an owner is solved by changing the pod.
What the listing leaves out is also worth knowing. There is no stated weight, size, body material, charging time or warranty term on this listing, so none of those are described here. If one of them matters to your decision, the manual or IVG directly are better sources than a guess.
The first day with a new body
A replacement device is simple to set up, but the first day is also the best time to learn how this particular unit behaves, which makes problems much easier to spot later.
Check the charge before anything else
The listing does not say what level of charge the device ships with, so look at the display as soon as it is out of the packaging. If the reading is low, charge it fully before fitting a pod. Starting from a full battery gives you a clean reference point for the rest of the day.
Read the manual once
It takes a few minutes and covers the two things the listing does not: how to change mode without a button, and how the pod goes in. Keep it somewhere you will find it again; most owners only need it a second time when something unexpected happens.
Fit a pod and confirm the mode
With a SMART MAX pod fitted according to the manual, glance at the screen to see which mode is active, and set the one you intend to use by default. Leave a new pod a little while before the first inhale so its coil is properly wetted, then take a few gentle draws to confirm everything fires as it should.
Make a mental note of the baseline
Over the first week, pay attention to roughly how far the battery reading falls across a normal day in your usual mode. You do not need to write it down. The point is to have a sense of what normal looks like for this device when it is new, because the most reliable sign of a battery beginning to wear is that the same day of use starts to take a bigger bite out of the charge.
Charging, done properly
A rechargeable device is only as convenient as its charging routine, and a little care here goes a long way over the months you own it.
Choosing a lead
Because the listing does not supply one, the cable is your choice. A short Type-C lead in good condition, with no frayed sheath or loose plug, is all that is needed. Many households already have one for a phone or headphones. If you use the same lead for several devices, check the Type-C end sits firmly in the SMART MAX port without wobbling; a plug that moves about in the socket is a common cause of charging that stops and starts.
Where and how to charge
Charge the device on a hard, dry surface at ordinary room temperature, rather than on a bed, a sofa cushion or in direct sun on a windowsill. Plug it in, and the screen's charging status will show that power is going in. Once the battery readout shows it is full, unplug it. There is no benefit in leaving it connected for hours afterwards, and a habit of unplugging when full is kind to any rechargeable battery.
The listing does not give a charging time, so the display is your guide. After the first few charges you will have a sense of how long yours takes from low to full, and that becomes the rhythm you plan around.
When to charge
Waiting until the battery is completely flat is not necessary. The display shows the level at a glance, and topping up when it is getting low, at a time that suits you, avoids the frustration of the device dying mid-afternoon. Some owners charge at the same point every day, for example at a desk in the morning; others charge whenever the readout drops below a level they are comfortable with. Either works.
Charging with a pod fitted
The listing does not say whether the pod should be removed while charging, so follow the manual on this point. Whichever you do, keep the device upright or lying flat on the surface rather than hanging from the cable, which strains both the lead and the port over time.
Charging away from home
Because the port is Type-C, the device can be topped up from the same kind of lead many laptops, cars and portable power banks already use. That flexibility is handy on a long day, but the same basic care applies wherever you charge. Avoid charging it on a hot dashboard in summer, keep it out of a bag where it might be squashed while the cable is connected, and unplug it once the display shows a full battery rather than leaving it attached for the whole journey. If you find yourself charging on the move often, it is usually a sign that Eco would suit your days better.
Reading the screen
The small display is the device's only way of reporting on itself, and it tells you three things.
- Battery level. How much charge is left. This is the reading you will look at most often, and the one that tells you when a top-up is due.
- Charging status. Whether power is going in while the device is plugged in. If you connect a cable and this does not appear, the lead, the power source or the plug fit in the port are the first things to check.
- Mode. Whether the device is set to Boost or Eco. Worth a glance whenever the vape feels different from usual, since an accidental change of mode is a simpler explanation than a faulty pod.
Beyond those three readings, the listing does not describe other screen functions such as puff counters or pod-level indicators, so do not expect them. Treat the display as a battery and mode gauge, and it will do that job well.
Boost, Eco and the time between charges
From an owner's point of view, the two modes are mostly a battery decision. IVG describe Boost as the setting for more flavour and vapour and Eco as the one for better battery efficiency. Put simply, Boost spends more of the 1000mAh cell on each inhale, and Eco spends less.
That gives you a straightforward way to stretch a charge. On a day when you will be away from a cable for a long time, set Eco in the morning and leave it there. On a day at home, with a lead never far away, there is no reason not to use Boost if you prefer it. The battery readout will show you, over a few days, roughly how much difference the setting makes with your own habits.
It is worth settling on a default. Many owners pick the mode they like best and use the other only in specific circumstances: Eco for travel, or Boost for a pod that feels a little muted. Switching back and forth constantly makes it harder to judge how long a charge should last, and harder to notice if the battery starts to fade with age.
Living with a buttonless device
The SMART MAX has no fire button. It senses the inhale and powers the coil for as long as you draw. For an owner, that has a few everyday consequences worth knowing.
The obvious one is simplicity. There is nothing to press and nothing to hold down, so the device is ready the moment you lift it. The less obvious one is that the airflow path matters more than it would on a button-fired device, because the sensor depends on detecting the draw. Pocket fluff, crumbs or a film of condensation around the pod and its airflow can make activation less reliable. A quick look and a dry wipe whenever the pod is changed keeps that path clear.
It also means you should never blow into the device to clear it. Blowing pushes moisture in the wrong direction, towards the parts you want to stay dry. If the draw feels blocked, remove the pod, wipe the area and refit it instead.
Finally, since the listing mentions no lock function, it is worth keeping the device in a pocket or pouch where the mouthpiece is not pressed against fabric. That keeps it clean and stops lint gathering where you inhale.
Looking after the body
The SMART MAX device has no user-serviceable parts listed, no coil to change and no tank to rinse. Care is mostly about keeping it dry, clean and away from knocks.
Keeping the pod area dry
Small amounts of condensation can build up where the pod meets the body. Every time you change a pod, take a moment to look at that area and wipe away any moisture with a dry tissue or a cotton bud. Liquid left there can find its way towards the contacts and cause the device to fire unreliably. Do not run the body under a tap or use cleaning sprays on it; a dry wipe is all it needs.
Keeping the contacts clean
The point where pod and device connect needs a clean contact to work every time. If the device stops firing reliably with a pod you know is good, remove the pod, wipe both contact surfaces gently with a dry cloth, and refit it according to the manual. This fixes a surprising number of apparent faults.
The finish
A black body tends to show dust, pocket lint and fingerprints more than scuffs. A soft, dry cloth brings it back. Avoid solvents or abrasive cleaners on the housing and the screen.
Heat and cold
Do not leave the device in a hot car, on a radiator, or in strong sun for long periods. Heat is unkind to rechargeable batteries and to the liquid in any fitted pod. Extreme cold is not ideal either; if the device has been left somewhere very cold, let it return to room temperature before charging it.
Storing it when not in use
If you are putting the device away for a while, for example because you are using a second body, charge it to a moderate level rather than leaving it completely flat, and keep it in a cool, dry drawer. Store it out of reach of anyone under 18, and check the battery every so often so it does not sit empty for months.
Carrying it about
The SMART MAX is described by IVG as a compact device, and it is designed to be carried. A few habits help it survive daily life.
- Pick one pocket. Keeping it in the same pocket or bag compartment every day makes it less likely to be left behind, and easier to find by touch.
- Keep it away from keys and coins. Metal objects scratch the finish and the screen, and anything that can press into the pod area is worth avoiding.
- Mind the seat. A device in a back trouser pocket takes a lot of pressure every time you sit down. A front pocket or a bag is kinder to it.
- Carry spare pods separately. If you take a second SMART MAX pod out with you, keep it in its packaging, in a different pocket, so it does not rattle against the device.
- Remember the cable on longer trips. Since no lead comes with the device, a Type-C cable in your bag on a weekend away saves relying on someone else's.
When a body needs replacing
Any rechargeable device eventually wears, and SMART MAX owners are the main audience for this listing precisely because of that. Knowing the signs helps you decide when to replace rather than persevere.
Signs of a tired device
- The battery readout drops noticeably faster than it used to, on the same mode and with a similar pattern of use.
- The device needs charging more than once a day when it used to manage a whole day comfortably.
- It fails to fire with a pod you know is good, even after cleaning the contacts and refitting.
- The screen behaves erratically or stops showing readings.
- Charging starts and stops even with a lead that works on other devices.
If a problem disappears when you fit a different pod, the pod was at fault rather than the body. If it persists across several pods, and cleaning and a fresh cable make no difference, the body is the likely cause, and replacing it is the practical answer.
Moving a pod from a failed body
When a device stops working with a part-used pod fitted, there is no need to throw the pod away with it. Remove it from the old body, check the contact area is dry, and fit it to the new device in the way the manual describes. Since the coil and the liquid are both in the pod, it should carry on as before. If the pod was itself the cause of the problem, you will know within a few draws, because the burnt taste or poor performance will follow it into the new body.
It is sensible, though, to start the replacement device on a fresh pod if you have one. That gives you a clean first impression of the new body without any doubt about the pod's condition, and you can go back to the part-used one afterwards.
After a loss
Losing a device is the other common reason people end up here. Pods are small and tend to stay at home in a drawer; the body is the part that travels, and so the part that goes missing. With spare pods still in hand, this listing gets you vaping again at the lowest outlay, and the pods you already have simply fit the new body.
A quick fault-finding table
Before deciding a body has reached the end, run through these checks. Most apparent faults turn out to be one of the first two columns.
| What you notice | Check first | Then try | Points to |
|---|---|---|---|
| No vapour on the inhale | Battery reading on the screen | Charge, then refit the pod | Flat battery or unseated pod |
| Screen stays blank when plugged in | Cable and power source on another device | A different Type-C lead | Faulty lead, or a body that has failed |
| Draw feels lighter than normal | Which mode is showing | Switch to your usual mode | An accidental mode change |
| Harsh or burnt taste | How long the pod has been in use | Fit a fresh pod | A spent pod, not the device |
| Fires only now and then | Moisture or lint at the pod contacts | Wipe dry and refit | Dirty contacts, or a worn body if it persists |
| Charge runs out far sooner than before | Mode and usage compared with the first weeks | A full charge from low on a known lead | An ageing battery |
If you reach the last column and it says the body, this listing is the replacement. If it says the pod, a new SMART MAX refill will fix it, and the device you already own is fine.
Keeping a spare body
At this price, some owners buy a second device before the first one fails, and keep it charged in a drawer. The logic is straightforward. If the main device is lost or stops working, the spare is ready immediately, with no wait for an order to arrive and no gap in the routine. If it is never needed, it has cost less than a single refill pod.
A spare needs a little attention to stay useful. Charge it to a middling level, keep it somewhere cool and dry, and check the display every couple of months so the battery never sits completely empty for long. Some owners go further and alternate between the two bodies week by week, which spreads the wear and means neither sits idle. Either approach works; the point is simply not to forget the spare exists until the day you need it and find it flat.
What to do with the old one
A spent device contains a rechargeable battery, so it belongs in an electrical recycling collection point rather than a household bin. Many supermarkets and household recycling centres in the UK accept small electricals and batteries. Remove any pod first and dispose of it according to local guidance.
Device only or a kit: the sums
This is the section that saves money, and it is easy to overlook. A SMART MAX vape kit on this site costs £10.95, and its listing describes it as a device plus a prefilled pod and a manual. The device on its own costs £4.99, and a single SMART MAX refill pod costs £7.95.
| Your situation | Device only route | Kit route | Lower cost |
|---|---|---|---|
| You need a body and already have pods | £4.99 | £10.95 | Device only, by £5.96 |
| You need a body and one pod | £4.99 + £7.95 = £12.94 | £10.95 | Kit, by £1.99 |
The pattern is clear. If you have pods at home, the device-only listing is the obvious buy. If you have no pods and would be ordering one anyway, a kit comes in £1.99 cheaper than the body plus a separate pod, as long as the flavour you want is one that comes in kit form. The honest advice is to check your drawer before ordering.
The kit route covers a wide spread of flavours. For fruit, there are names such as the Blueberry Peach Vape Kit, the Berry Burst Vape Kit and the Blueberry Watermelon Cherry Vape Kit. For grape, both the Grape Vape Kit and the Summer Grape Vape Kit are listed, the second name suggesting a lighter, more seasonal take on the same fruit. For citrus and orange, the Lemon & Lime Vape Kit and the Retro Orange Vape Kit sit side by side. For mint, the Polar Mint Vape Kit and the Classic Menthol Vape Kit cover the cooler end. Each of those is described here only by what its name says.
The blue raspberry group is well represented in kit form too, including the Blue Raspberry Ice Vape Kit, the Blue Razz Lemonade Vape Kit and the Blue Sour Raspberry Vape Kit, and there are kits such as the Banana Ice Vape Kit and the Fruit Fusion Vape Kit for other profiles.
There is one more reason to choose a kit over this listing even when you have pods: a kit gives you a second, spare device along with the pod. If you are the sort of owner who loses devices, that spare has real value. If you are not, the device-only route is simpler and cheaper.
Where the device sits in your running costs
Over any length of time, the body is the small part of what a SMART MAX owner spends. The pods are the recurring cost; the device is a one-off that comes round again only when it is lost or worn. At £4.99, replacing a body costs noticeably less than a single £7.95 refill pod, and it is currently reduced from £7.99.
That has a practical implication. There is little to be gained by nursing a clearly failing device along for weeks. If the battery no longer gets you through the day, or the device fires unreliably even after the checks above, the cost of a replacement is small compared with the irritation of a body you cannot rely on. On the other hand, a device that works well needs no replacing at all, however long you have had it; there is no scheduled life for the body, and the listing does not suggest one.
Where the money really goes is in pod choices, and there the device-only listing gives you the most freedom: with a working body in hand, every future order can be pods alone, in whatever flavours you like, without paying for hardware you do not need.
Keeping pods ready for the body
A device-only purchase goes hand in hand with a supply of SMART MAX pods. There is no need to overthink this, but having two or three pods in hand at any time means the body is never idle.
Pods are sold individually at £7.95. A few examples from across the range: Peach Ice names a stone fruit with cooling; Raspberry Blast names a single berry; Kiwi Passionfruit Guava is a tropical trio; Cherry Cola is drink-style; Red Freeze signals cooling with a red profile it does not specify. Some names say less: Hub Blast and Pro Blue do not name an ingredient, and are best bought singly the first time.
If you are replacing a body and want to carry on exactly where you left off, the simplest approach is to reorder the pod you were using when the old device went missing. Blue Razz GB, Berry Burst and Blueberry Watermelon Cherry are all available as single pods. The IVG SMART MAX Range page lists every pod and kit together, and all IVG products covers the rest of the IVG line.
Black or blue?
The black body is one of two colours on the device-only listing, alongside blue. The specifications given for the two are identical: same battery, same screen, same modes, same Type-C charging, same price. The choice is purely one of looks, with one practical footnote. If you own two SMART MAX bodies, choosing different colours makes it easy to tell at a glance which one has which pod fitted, or which one is charged.
Black does have one small ownership quirk: a dark device is harder to spot when dropped on a dark car floor, a bag lining or a patterned carpet. If you are the sort of owner who has lost a body before, that may be worth a thought. Otherwise, pick whichever you prefer to look at.
Keep a note of the product code
The listing gives the black device the code FG-000152-776-NA-NA. It is not something you need day to day, but if you ever want to reorder exactly the same body in the same colour, having that code to hand removes any doubt about which listing is which. The same goes for the manual: keep it with the packaging, and you will have everything in one place if you need to check how the modes work months from now.
Owner questions
What exactly is in the packaging?
The black SMART MAX device and a user manual. No pod, no liquid and no charging cable are included.
What cable do I need to charge it?
A cable with a Type-C plug for the device end. IVG state that the cable is not included, so use one you already own or buy one separately.
How long does it take to charge?
The listing does not give a charging time. The display shows charging status while plugged in and the battery level, so you will quickly learn how long your own device takes.
Does the device arrive charged?
The listing does not say. Check the battery reading on the display when you unpack it, and charge it fully first if the level is low.
Is there a lock to stop it firing in a pocket?
The listing does not mention one. Because the device fires on an inhale rather than a button press, there is no button to be pressed by accident in a pocket.
How long does a charge last?
That depends on the mode, the pod and how often you vape. The battery is 1000mAh, and Eco is the setting IVG describe as more battery efficient, so it will stretch a charge further than Boost.
Do I ever need to change a coil in the device?
No. The 0.8 ohm mesh coil is part of each SMART MAX pod, so the body has no coil of its own. Fitting a new pod gives you a new coil.
Will my existing SMART MAX pods fit?
Yes. This is the standard SMART MAX device, designed for SMART MAX refill pods, so pods bought for a previous SMART MAX body fit it.
My device will not fire. Is it broken?
Check the battery on the display first, then remove the pod, wipe the contacts dry and refit it following the manual. If it still will not fire with a pod you know is good, the body may be at the end of its life.
Is it cheaper to buy a kit instead?
Only if you also need a pod. The device alone is £4.99; the device plus a single pod is £12.94, while a kit with its prefilled pod is £10.95. If you already have pods, the device on its own is cheaper.
Is there any difference between the black and blue versions?
None in specification. The listings describe the same battery, display, modes and charging for both. Only the colour differs.
Can I move a part-used pod from my old device?
Yes, if the old device failed rather than the pod. Remove it, check the contacts are dry and fit it to the new body as the manual describes. If the problem follows the pod, replace the pod instead.
How should I dispose of an old device?
It contains a rechargeable battery, so take it to an electrical or battery recycling point rather than putting it in household waste. Remove any pod first.
How do I change between Boost and Eco?
The listing confirms both modes and shows the active one on the screen, but does not describe the method. The user manual supplied with the device explains it.
Summing up
The black IVG SMART MAX device is the body of the system with nothing else attached, at £4.99. It brings a 1000mAh rechargeable battery, a screen for battery, charging and mode, Boost and Eco settings, inhale-to-fire operation and a Type-C port. It brings no pod, no liquid and no cable, and it takes standard SMART MAX refill pods with their built-in 0.8 ohm mesh coils.
It is the right buy for an owner with pods in the drawer and a lost, broken or tired body to replace. Keep it dry, charge it sensibly, carry it away from keys, and it will do its job. If you have no pods at all, a SMART MAX kit is cheaper than this device plus a separate pod, so check what you already own before ordering.
Strictly for adults aged 18 and over. Nicotine is an addictive substance.